I had an issue on a client system where Kasperski AV 2010 causes issues with a client connection. The system I worked with was Win7 X64 Home Premium. The tunnel would connect but would not create SA's. Routes and interfaces were all good. The Kasperski software adds NDIS6 driver bindings. I removed those and rebooted but was unable to pass traffic. Removing Kasperski fixed the issue. It's possible that the network protection component could be removed but I wasn't able to test that.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, February 11, 2010 10:33 AM To: [email protected] Subject: vpn-help Digest, Vol 41, Issue 17 Send vpn-help mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit http://lists.shrew.net/mailman/listinfo/vpn-help or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of vpn-help digest..." Today's Topics: 1. Re: failed to attach to key daemon (Andreas Hoppe) 2. Re: Problem report - NetGear modeConfig without XAUTH (Alexis La Goutte) 3. Using VPN Trace utility (Mike Parsons) 4. Re: VPN Tunnel disconnected by gateway after successful authentication (Don) 5. Re: Using VPN Trace utility (Mike Parsons) 6. Re: Using Shrewsoft with IAS Radius + Cisco (Shawn Edwards) ---------------------------------------------------------------------- Message: 1 Date: Wed, 10 Feb 2010 19:08:44 +0100 From: Andreas Hoppe <[email protected]> Subject: Re: [vpn-help] failed to attach to key daemon To: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset=ISO-8859-15; format=flowed Hi, I got a little bit more information now. I installed the software on my Windows XP machine and found some mistakes in the configuration. But now I get the following messages: bringing up tunnel ... gateway authentification error tunnel disabled detached from key daemon I think I have the wrong key in the tab Authentification -> Credentials I tried the key that is given in the config-file from the avm-software (many digits ans letters...) but I get no access. Which key is to be used? Andreas Am 09.02.2010 08:28, schrieb Andreas Hoppe: > Hi, > > I tried to connect with shrew soft to a AVM Fritz!Box 7270. I use the > SuSE 11.0 linux. The connection settings a proofed with the > Fritz!-software on a Windows XP machine. I made the settings as > discribed on the AVM-homepage: > http://www.avm.de/de/Service/Service-Portale/Service-Portal/VPN_Interope rabilitaet/15729.php?portal=VPN > > When I try to connect, I get the following error message: failed to > attach to key daemon. > > I tried it as "normal" user and as root. > > I searched in google for the error messages but I did not find any > matching sites. What means the kex daemon? > > Greetings > > Andreas > > > > > > > -- Kfz-Sachverst?ndigen- und Ing.-B?ro Hoppe und Ganter Martinstra?e 2 77855 Achern Tel.: 07841 / 21097 Fax: 07841 / 24761 Email: [email protected] URL: http://www.sv-buero-hoppe.de ------------------------------ Message: 2 Date: Thu, 11 Feb 2010 14:58:19 +0100 From: Alexis La Goutte <[email protected]> Subject: Re: [vpn-help] Problem report - NetGear modeConfig without XAUTH To: Micha? W?grzyn <[email protected]> Cc: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset="iso-8859-2" Hi All I made a test with a FVS336G with the latest firmware available and I have the same problem. I analysed IKE trace and i see the router send a ISAKMP_CFG_SET(3) in Config Mode to reply a ISAKMP_CFG_REQUEST (frame 5 and 6 of Michal packet capture). I am not an expert IPsec but I think it's a bug of router Matthew you confirm? 2010/1/6 Micha? W?grzyn <[email protected]> > Hi Matthew, > > Yes, I'm still using a modecfg record. > > Regards, > Michal > > ----- Original Message ----- > *From:* Matthew Grooms <[email protected]> > *To:* Micha? W?grzyn <[email protected]> > *Cc:* [email protected] > *Sent:* Wednesday, January 06, 2010 1:06 AM > *Subject:* Re: [vpn-help] Problem report - NetGear modeConfig without > XAUTH > > On 12/28/2009 8:44 AM, Micha? W?grzyn wrote: > > Hello, > > I have problem with connection Shrew with NetGear FVX538 v2 with > > firmware 3.0.5-24 (latest). > > If I configure NetGear to use XAUTH connection can be established, but > > If I disable XAUTH on NetGear and on Shrew (Mutual PSK) I can't connect. > > Anyone has similar problem? > > I try Shrew 2.1.6 and latest 2.2.0 > > Hi Michael, > > Are you still using a modecfg record? > > -Matthew > _______________________________________________ > vpn-help mailing list > [email protected] > http://lists.shrew.net/mailman/listinfo/vpn-help > > > _______________________________________________ > vpn-help mailing list > [email protected] > http://lists.shrew.net/mailman/listinfo/vpn-help > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.shrew.net/pipermail/vpn-help/attachments/20100211/31e0cd31/ attachment-0001.html ------------------------------ Message: 3 Date: Thu, 11 Feb 2010 10:57:29 -0500 From: "Mike Parsons" <[email protected]> Subject: [vpn-help] Using VPN Trace utility To: <[email protected]> Message-ID: <007301caab32$ebdaa5d0$c38ff1...@[email protected]> Content-Type: text/plain; charset="us-ascii" Hello- I am trying to debug a vpn client connect issue using Shrew Soft 2.1.5 on windows 7 and connecting to a Juniper SSG I started the VPN trace application and then attempted top connect to the SSG. No output showed up in any of the VPN trace application tabs nor did anything show up in the log files of the client. Any thoughts? Mike Parsons -- CISSP, IAM, IEM Chief Technical Officer <mailto:[email protected]> [email protected] cell: 336-403-9710 office: 336-306-5573 Information security architecture and consulting Risk assessment Compliance readiness assessment Design and implementation services JNCIA -- Firewalls, SSL/VPN, IDP JNSS -- UAC, Security, Routers, DX Ironport, Bluecoat and Tipping Point certified Graduate Certificate in Information Security and Privacy Security+ MCP <http://webmail.triad.rr.com/do/mail/message/mailto?to=gmparsons%40triad .rr. com> www.mynetwiz.com ******************************************************* Managing information risk through the application of sound technology If you know me, you can trust me. Galatians 2:20 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.shrew.net/pipermail/vpn-help/attachments/20100211/bb188829/ attachment-0001.html ------------------------------ Message: 4 Date: Thu, 11 Feb 2010 11:14:55 -0500 From: Don <[email protected]> Subject: Re: [vpn-help] VPN Tunnel disconnected by gateway after successful authentication To: Matthew Grooms <[email protected]> Cc: "[email protected]" <[email protected]> Message-ID: <27303227e96e6e4c891127103483861239f8cca...@vmbx101.ihostexchange.net> Content-Type: text/plain; charset="us-ascii" Thanks Matthew. The tunnel does stay up with the 2.1.6 beta 4 version I just installed. It seems to stop passing traffic after a little while, but I will continue to try it to see how often that occurs and find any correlations. -Don ________________________________________ From: Matthew Grooms [[email protected]] Sent: Tuesday, February 09, 2010 1:14 AM To: Don Cc: [email protected] Subject: Re: [vpn-help] VPN Tunnel disconnected by gateway after successful authentication On 1/28/2010 12:12 PM, Don wrote: > I am hoping the community can help me with this. > I am using a Windows 7 64bit OS on my laptop and have used the NCP > applcation (trial) in the successfully in the past. However, with > Shrew's client, I can authenticate, but right after the splashscreen > that tells me to behave myself on he corporate network, I get a > disconnect by gateway. I have no idea what is happening that the gateway > disconnects me after an appearent successful negotiation and > authentication. Anyone seen this before and have any ideas? > Some of these problems have been corrected with the 2.1.6 betas. What version are you running? -Matthew ------------------------------ Message: 5 Date: Thu, 11 Feb 2010 11:29:22 -0500 From: "Mike Parsons" <[email protected]> Subject: Re: [vpn-help] Using VPN Trace utility To: "'Lukasz Sokol'" <[email protected]>, <[email protected]> Message-ID: <009701caab37$61d3ec70$257bc5...@[email protected]> Content-Type: text/plain; charset="iso-8859-1" Thanks, Lukasz-- You're referring to the open log button I assume and not the trace log? What is the trace log ubutton used for? Why aren't log files showing up in the shrew soft directory under the debug folder? Thanks in advance. Mike Parsons -- CISSP, IAM, IEM Chief Technical Officer [email protected] cell:??? 336-403-9710 office:? 336-306-5573 Information security architecture and consulting Risk assessment Compliance readiness assessment Design and implementation services JNCIA -- Firewalls, SSL/VPN, IDP JNSS -- UAC, Security, Routers, DX Ironport, Bluecoat and Tipping Point certified Graduate Certificate in Information Security and Privacy Security+ MCP www.mynetwiz.com ******************************************************* Managing information risk through the application of sound technology If you know me, you can trust me. Galatians 2:20 -----Original Message----- From: Lukasz Sokol [mailto:[email protected]] Sent: Thursday, February 11, 2010 11:22 AM To: Mike Parsons Subject: Re: [vpn-help] Using VPN Trace utility Hello Mike, On 11/02/2010 15:57, Mike Parsons wrote: > Hello- > > > > I am trying to debug a vpn client connect issue using Shrew Soft 2.1.5 on > windows 7 and connecting to a Juniper SSG > > > > I started the VPN trace application and then attempted top connect to the > SSG. No output showed up in any of the VPN trace application tabs nor did > anything show up in the log files of the client. > > > > Any thoughts? > When you start Shrew Trace Utility, you need to go to File -> Options, there select Log Output Level (I select Informational), click OK, then in the main window click on Open Log button in each tab. (ver 2.1.5 had it so) Lukasz ------------------------------ Message: 6 Date: Thu, 11 Feb 2010 13:02:49 -0330 From: Shawn Edwards <[email protected]> Subject: Re: [vpn-help] Using Shrewsoft with IAS Radius + Cisco To: [email protected], [email protected] Message-ID: <of1d5362e5.5d079877-ona32576c7.005ac4a1-a32576c7.005ae...@pathix.com> Content-Type: text/plain; charset="us-ascii" We are using a Cisco ISR with Easy VPN Server to connect remote users to our network. We've been using it for quite some time with Cisco VPN Client but obviously need a 64 bit VPN Client. I came across shrewsoft VPN Client not too long ago, and would love if I could get this software working as it seems too good to be true.. In any case Here's what we have: Cisco ISR 2821 Running IPSEC VPN , doing radius authentication to a Windows Server 2003 Radius Server. Everything's configured properly as we use it successfully with the Cisco VPN Client. I installed shrewsoft 2.1.5, and it successfully imported the existing cisco PCF File we had. When I attempt to connect it asks me for username and password (No Domain field like Cisco VPN Though) I enter in credentials of a user that has permission's to connect.. Here is the output of shrewsoft: config loaded for site 'MyCompany.pcf' configuring client settings ... attached to key daemon ... peer configured iskamp proposal configured esp proposal configured client configured local id configured pre-shared key configured bringing up tunnel ... user authentication error tunnel disabled detached from key daemon I did a Debug RADIUS on the cisco ISR and get the following: *Feb 10 15:08:16 NST: ISAKMP:(0):Support for IKE Fragmentation not enabled *Feb 10 15:08:16 NST: RADIUS/ENCODE(000064C7):Orig. component type = VPN_IPSEC *Feb 10 15:08:16 NST: RADIUS: AAA Unsupported Attr: interface [175] 13 *Feb 10 15:08:16 NST: RADIUS: 31 39 32 2E 31 36 38 2E 32 35 32 [192.168.252] *Feb 10 15:08:16 NST: RADIUS/ENCODE(000064C7): dropping service type, "radius-se rver attribute 6 on-for-login-auth" is off *Feb 10 15:08:16 NST: RADIUS(000064C7): Config NAS IP: removed-ip-address *Feb 10 15:08:16 NST: RADIUS/ENCODE(000064C7): acct_session_id: 25799 *Feb 10 15:08:16 NST: RADIUS(000064C7): sending *Feb 10 15:08:16 NST: RADIUS(000064C7): Send Access-Request to 192.168.32.2:1645 id 1645/5, len 161 *Feb 10 15:08:16 NST: RADIUS: authenticator 97 70 52 F6 D5 AD D2 3F - 57 93 56 2F 79 6D C5 3F *Feb 10 15:08:16 NST: RADIUS: User-Name [1] 9 "testinguser" *Feb 10 15:08:16 NST: RADIUS: Calling-Station-Id [31] 17 "removed-ip-address" *Feb 10 15:08:16 NST: RADIUS: Vendor, Microsoft [26] 24 *Feb 10 15:08:16 NST: RADIUS: MS-CHAP-Challenge [11] 18 *Feb 10 15:08:16 NST: RADIUS: 97 70 52 F6 D5 AD D2 3F 57 93 56 2F 79 6D C5 3F [?pR?????W?V/ym??] *Feb 10 15:08:16 NST: RADIUS: Vendor, Microsoft [26] 58 *Feb 10 15:08:16 NST: RADIUS: MS-CHAP-V2-Response[25] 52 * *Feb 10 15:08:16 NST: RADIUS: NAS-Port-Type [61] 6 Virtual [5] *Feb 10 15:08:16 NST: RADIUS: NAS-Port [5] 6 9 *Feb 10 15:08:16 NST: RADIUS: NAS-Port-Id [87] 15 "removed-ip-address" *Feb 10 15:08:16 NST: RADIUS: NAS-IP-Address [4] 6 removed-ip-address *Feb 10 15:08:16 NST: RADIUS: Received from id 1645/5 removed-ip-address:1645, Access- Reject, len 42 *Feb 10 15:08:16 NST: RADIUS: authenticator 4D 85 12 70 89 79 43 60 - 5B 76 6B BA 80 20 92 D3 *Feb 10 15:08:16 NST: RADIUS: Vendor, Microsoft [26] 22 *Feb 10 15:08:16 NST: RADIUS: MS-CHAP-ERROR [2] 16 *Feb 10 15:08:16 NST: RADIUS: 00 45 3D 36 39 31 20 52 3D 30 20 56 3D 33 [?E=691 R=0 V=3] *Feb 10 15:08:16 NST: RADIUS(000064C7): Received from id 1645/5 *Feb 10 15:08:16 NST: RADIUS/DECODE: Failure message in the MS-Chap-Error attrib ute is E=691 R=0 V=3 *Feb 10 15:08:16 NST: RADIUS/DECODE: Authentication failure Any ideas/help would be greatly appreciated.. Thanks, Shawn Edwards Sr. Network Analyst Pathix ASP A Division of Vector Aerospace Corporation Ph: 709-724-8564 Fax: 709-724-8545 [email protected] From: "Mike Parsons" <[email protected]> To: "'Lukasz Sokol'" <[email protected]>, <[email protected]> Date: 02/11/2010 12:59 PM Subject: Re: [vpn-help] Using VPN Trace utility Thanks, Lukasz-- You're referring to the open log button I assume and not the trace log? What is the trace log ubutton used for? Why aren't log files showing up in the shrew soft directory under the debug folder? Thanks in advance. Mike Parsons -- CISSP, IAM, IEM Chief Technical Officer [email protected] cell: 336-403-9710 office: 336-306-5573 Information security architecture and consulting Risk assessment Compliance readiness assessment Design and implementation services JNCIA -- Firewalls, SSL/VPN, IDP JNSS -- UAC, Security, Routers, DX Ironport, Bluecoat and Tipping Point certified Graduate Certificate in Information Security and Privacy Security+ MCP www.mynetwiz.com ******************************************************* Managing information risk through the application of sound technology If you know me, you can trust me. Galatians 2:20 -----Original Message----- From: Lukasz Sokol [mailto:[email protected]] Sent: Thursday, February 11, 2010 11:22 AM To: Mike Parsons Subject: Re: [vpn-help] Using VPN Trace utility Hello Mike, On 11/02/2010 15:57, Mike Parsons wrote: > Hello- > > > > I am trying to debug a vpn client connect issue using Shrew Soft 2.1.5 on > windows 7 and connecting to a Juniper SSG > > > > I started the VPN trace application and then attempted top connect to the > SSG. No output showed up in any of the VPN trace application tabs nor did > anything show up in the log files of the client. > > > > Any thoughts? > When you start Shrew Trace Utility, you need to go to File -> Options, there select Log Output Level (I select Informational), click OK, then in the main window click on Open Log button in each tab. (ver 2.1.5 had it so) Lukasz _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help This e-mail may contain confidential information and the sender does not waive any related rights and obligations. If you are not the intended recipient please notify the sender and discard it. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.shrew.net/pipermail/vpn-help/attachments/20100211/2baf4e80/ attachment.html ------------------------------ _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help End of vpn-help Digest, Vol 41, Issue 17 **************************************** _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
