Hi, I tried 2.1.6 beta 4, sleep problem still there.
Is this confirmed to be a bug? Or setup related? Thanks ..Ip ________________________________ From: Stuart Hall <[email protected]> To: Ip <[email protected]> Cc: [email protected] Sent: Wed, December 30, 2009 8:43:52 AM Subject: Re: [vpn-help] 2.1.6-beta3 - cannot sleep while tunnel active Not very useful, but "me too". I have to make sure that I always disconnect before sleeping (I rarely "shutdown" my laptop) otherwise it freezes and dies, usually with a "driver did not respond to sleep request" type of error. This is a new problem since the updated driver code was introduced. The previous version merely BSODed about 1 time in 4 suspends. Progress? I reckon so ;-) SH On Wed, Dec 30, 2009 at 8:47 AM, Ip <[email protected]> wrote: > Hi, > > Thanks very much to the support of this list, I have successfully connected > to our Cisco gateway with advice from this thread: > > http://lists.shrew.net/pipermail/vpn-help/2009-December/002572.html > > I did not use the workaround of a single include as in issue#1, so probably > it was #2 or #3 which fixed our issues. I just import our pcf without any > modification, so it would not be #4. > > However, I noticed a small problem- my notebook running Windows 7 Pro 64-bit > cannot sleep while the tunnel is active. The screen became blank, all keys > have no response (except caps lock which lit up the CAPS LED), power LED did > not indicate sleep, hard disk LED keep flashing occasionally. > > Need to long press power button to shutdown and reboot to exit this state. > > Cannot test other versions as 2.1.6-beta3 is the first one that works. > > Please let me know if you need further info. > > Thanks...Ip > > > > > _______________________________________________ > vpn-help mailing list > [email protected] > http://lists.shrew.net/mailman/listinfo/vpn-help > >
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
