On 2/24/2010 2:04 AM, Intellia Informations wrote: > Hello, > > I am able to established a tunnel between the remote host client running > ShrewVPNClient and a remote network. > > But no traffic is running on the tunnel and the ping or tracert (with IP > > address) do not know a remote machine on the remote network . > > When using CISCO VPN Client, it works well. > > I have done some trace log files with the trace utility... but not able > to understand what is wrong. > > I tried with or without NAT-T : no change, remote host still can not be > reached. > > I need some advice : it would be very helpful, >
Hi Pierre, The VPN client is completing phase1 without any issue. The gateway is complaining about NO-PROPOSAL-CHOSEN for phase2. This usually means there is some setting that isn't correct. Try switching the PFS settings between group2 and disabled and see if that has any effect. -Matthew _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
