On 3/2/2010 3:28 AM, Christian Wattengård wrote: > I use Windows 7/64 to connect to a VPN at our webhost. Everything works > fine in XP/Vista 32 with the Cisco client. > > When connected via VPN I have access to 5 different machines. However, > if I work only on two of them for a while without connecting to the > other three, it just shuts them out. No reply to ping or anything. To be > able to connect to them I have to disconnect the VPN-client, stop the > IKE service, start the IKE service, reconnect the VPN. Then I can get > access. > > This happens on a regular basis. Switching the logging on the IKE > service to debug shows no extra data when it shuts them out. > > Any hints on what could be going on? I really don’t want to go back to > 32-bit, but this thing disturbs my workflow-zen ;) >
You can try using a single 0.0.0.0/0 include network under the policy tab in your site configuration. This will prevent you from accessing the internet via your local internet connection but it may improve your VPN situation. -Matthew _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
