Hi Rainer, The Virtual Wifi Miniport is used to have connection to more than one WLAN simultanously. It should only appear (together with a corresponding Virtual Wifi Adapter) after it is enabled manually via netsh (netsh wlan set hostednetwork allow). To config multipe WLANs, you then need to add them with netsh wlan set hostednetwork allow ssid=… key=… keyUsage=persistent.
Regards, Clemens Hoffmann ________________________________ Von: [email protected] [[email protected]] im Auftrag von Rainer Budde [[email protected]] Gesendet: Dienstag, 9. März 2010 09:02 An: [email protected] Betreff: Re: [vpn-help] Shrew Client and routing through AVM Fritz Router7270 Dear all, thank you all for your replies. My colleague has a network adapter which called “Microsoft Virtual Wifi Miniport Adapter”. I deactivated the adapter and everything works without any problems. For this reason this problem is solved for me. This might be a little bit OT: I was very surprised about this “new” adapter and I searched for information about it in the internet. But I don’t found the information when the adapter will be installed by Microsoft automatically. Does anybody know when the adapter will be installed (maybe if the notebook was connected to several wifi networks)? Kind regards Rainer Budde -- Rainer Budde Software Engineering RWH Industrieautomatisierung GmbH Emsteker Strasse 14-16 D-49661 Cloppenburg Fon: +49 (0) 4471 - 9293 -18 Fax: +49 (0) 4471 - 9293 -22 Mail: [email protected] Geschäftsführer: Andreas Reuter, Amtsgericht Oldenburg, HRB 151141 ----------------------------------------------------------------------- This e-mail and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to whom they are addressed. This communication represents the originator's personal views and opinions, which do not necessarily reflect those of RWH Industrieautomatisierung GmbH or any of its subsidiaries or affiliates. If you are not the original recipient or the person responsible for delivering the e-mail to the intended recipient, be advised that you have received this e-mail in error, and that any use, dissemination, forwarding, printing or copying this e-mail is strictly prohibited. If you receive this e-mail in error, please immediately notify [email protected] ________________________________ Von: [email protected] [mailto:[email protected]] Im Auftrag von Linwood Ferguson Gesendet: Montag, 8. März 2010 13:46 An: [email protected] Betreff: Re: [vpn-help] Shrew Client and routing through AVM Fritz Router7270 >>But if he is connected to the Wireless LAN he couldn’t access to the >>VPN-Router (LANCOM 1711+ latest firmware). >>He can ping the LANCOM VPN-Router and he can access to all other internet >>services >> but if he try to make a VPN connection the connection immediately fails with >> the >> message “negotiation timeout” and “detach from the key daemon”. >From prior reactions from the list I may be the only one with this symptom and >solution but you may want to try it. I found that in Windows 7 there is an >automatically created “Microsoft virtual Wifi Miniport Adapter”. This is a >new “feature” in W7 and is not necessary to use Wifi. I had similar symptoms to the above, plus DNS resolution failures (when not connected), and disabling the above adapter fixed them 100%. Note you cannot just delete the device – it is recreated every time you enable the physical wifi adapter. But if you disable it, it remembers and says disabled. You might give it a try. I have no explanation to offer for it, just that it worked for me. Linwood PS. In my case everything worked fine with it not disabled for weeks, then all of a sudden it quit working entirely and only started again when I disabled the adapter, despite reboots, de-and-re-install of the software, different versions, etc.
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
