Hello,
I'm hoping you will help me to identify the problem here.
Problem:
Shrew VPN client fails to connect to my gateway when "ike config push"
is choosed.
I configured "ike config push" method in the general tab.
phase-1 and phase-2 configuration matches with what are configured on
gateway.
Situation:
- Phase-1 completed successfully
- After xauth is completed, gateway is pushing IP details to client.
- Shrew-client is sending two ISAKMP_CFG_ACK packets to gateway. One
with no attributes and other with accepted attributes list.
debug logs are attached.
If i disable "Auto configuration" in general tab and assigns a manual IP,
everything works file. Tunnel establishes and traffic goes through.
"ike config pull" is not working in my case.
Here are some additional details
. VPN Client Version : 2.1.5
. Windows OS Version : Windows XP
. Gateway Make/Model : Watchguard's Firebox X1250e
. Gateway OS Version ( if known ) : Do not know
Thanks,
Mastan.
debug.7z
Description: Binary data
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
