Hi Matthew, I transferred 50GB and the error did not occurred. However I have excessive processor usage. Svchost.exe runs network related services on my PC. I try to run hijackthis to identify the problem.
Best, Tamas -----Original Message----- From: Matthew Grooms [mailto:[email protected]] Sent: Tuesday, June 15, 2010 6:09 PM To: Uracs Tamás Cc: [email protected] Subject: Re: [vpn-help] Fwd: Internet connection dies after some minutes of heavy download traffic On 6/15/2010 10:12 AM, Uracs Tamás wrote: > Hi Matthew, > Hi Tamas, > I testing the lwf9 build and no connection loss so far. > Should I step forward to the lwf 10? Yes please. > Is it normal, if I try to connect a VPN the result is BSOD? > Yes. The drivers you are testing are stitched together hybrids of the Shrew Soft and Microsoft sample drivers. Descriptions and a few brief instructions were included in my previous email. Please let me know if lwf-10 or lwf-11 cause the issue. Thanks again, -Matthew > > -----Original Message----- > From: Matthew Grooms [mailto:[email protected]] > Sent: Saturday, June 12, 2010 7:44 PM > To: Uracs Tamás > Cc: [email protected] > Subject: Re: [vpn-help] Fwd: Internet connection dies after some > minutes of heavy download traffic > > On 6/11/2010 7:55 AM, Uracs Tamás wrote: >> Hi Matthew, >> >> I just had a network loss with the lwf8 build. >> > > Hi Tamas, > > Thanks for testing. I'm a little disappointed that we aren't closer to fixing > this issue yet. Here are three new builds to try. I went back to the > Microsoft example driver and copied the send receive path functions into our > driver for testing ... > > http://www.shrew.net/download/vpn/vpn-client-2.1.6-lwf-9.exe > http://www.shrew.net/download/vpn/vpn-client-2.1.6-lwf-10.exe > http://www.shrew.net/download/vpn/vpn-client-2.1.6-lwf-11.exe > > lwf9 - Both the send and receive functions are replaced with MS sample > passthru functions. If we still see a problem with this build, then we need > to consider that the problem may not be the fault of our driver. > > lwf10 - The receive functions are replaced with MS sample functions. If we > see a problem with this build, there may be an issue with breaking up the > send NBLs before processing ( completely legal according to MS docs ). > > lwf11 - The send functions are replaced with MS sample functions. If we see a > problem with this build, there may be an issue with breaking up the receive > NBLs before processing ( completely legal according to MS docs but re-linking > is required when ownership is returned to a caller under low resource > conditions ). > > I also left the driver debug output enabled so it can be captured with a > utility such as debugview ... > > http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx > > If lwf9 works correctly, but lwf10 or lwf11 exhibits the issue, please > capture the output and forward it to me. I would advise against doing this > until you determine which package ( 10 or 11 ) is suspect. It will slow down > your system and potentially alter the outcome of your tests. > With any luck, we may see something interesting in the logs. > > Thanks again for your help. I look forward to hearing the results. > > -Matthew > _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
