I am trying to connect to an SSG5. I followed the guide:
http://www.shrew.net/support/wiki/HowtoJuniperSsg
but the client stops at "bringing up tunnel" and then hangs there forever. On
the server, I have the following messages:
2010-06-24 07:47:03 info IKE<71.191.197.230>: Received initial contact
notification and removed Phase 1 SAs.
2010-06-24 07:47:03 info IKE<71.191.197.230>: Received initial contact
notification and removed Phase 2 SAs.
2010-06-24 07:47:03 info IKE<71.191.197.230>: Received a notification
message for DOI <1> <24578> <INITIAL-CONTACT>.
2010-06-24 07:47:03 info IKE<71.191.197.230> Phase 1: Completed
Aggressive mode negotiations with a <28800>-second lifetime.
2010-06-24 07:47:03 info IKE<71.191.197.230> Phase 1: Completed for user
<Test>.
2010-06-24 07:47:03 info IKE<71.191.197.230> Phase 1: IKE responder has
detected NAT in front of the remote device.
2010-06-24 07:47:03 info IKE<71.191.197.230> Phase 1: IKE responder has
detected NAT in front of the local device.
2010-06-24 07:47:03 info IKE<71.191.197.230> Phase 1: Responder starts
AGGRESSIVE mode negotiations.
What am I missing?
Thanks,
Igor
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
