I have setup the DHCP on my Netgear FVS336G to use a 10.10.1.0 subnet. I can connect to the VPN, but when I try to ping or use remote desktop to a computer (10.10.1.2) behind the VPN it fails. I can ping the Netgear router itself (10.10.1.1).
Any suggestions? I have setup the Netgear FVS336G using the standard settings from the VPN Wizard: I am using the following Shrew Soft configuration: n:version:2 n:network-ike-port:500 n:network-mtu-size:1380 n:network-natt-port:4500 n:network-natt-rate:30 n:network-frag-size:540 n:network-dpd-enable:1 n:client-banner-enable:0 n:network-notify-enable:1 n:client-wins-used:0 n:client-wins-auto:0 n:client-dns-used:0 n:client-dns-auto:0 n:client-splitdns-used:0 n:client-splitdns-auto:0 n:phase1-dhgroup:2 n:phase1-life-secs:3600 n:phase1-life-kbytes:0 n:vendor-chkpt-enable:0 n:phase2-life-secs:3600 n:phase2-life-kbytes:0 n:policy-nailed:0 n:policy-list-auto:0 n:client-addr-auto:1 s:network-host:192.168.1.42 s:client-auto-mode:disabled s:client-iface:direct s:network-natt-mode:enable s:network-frag-mode:enable s:auth-method:mutual-psk-xauth s:ident-client-type:fqdn s:ident-server-type:fqdn s:ident-client-data:fvs_remote.com s:ident-server-data:fvs_local.com b:auth-mutual-psk:cGFzc3dvcmQ= s:phase1-exchange:aggressive s:phase1-cipher:3des s:phase1-hash:sha1 s:phase2-transform:esp-3des s:phase2-hmac:sha1 s:ipcomp-transform:disabled n:phase2-pfsgroup:0 s:policy-list-include:10.10.1.0 / 255.255.255.0 Richard Sargent WorldPak, Inc. [email protected] (703) 893-6202 x7103
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
