Dear Kevin, thanks for advice, but IP adresses and subnet are definitely adjusted. L2TP/Ipsec with generic WinXP or Drayteks's VPN SmartClient-4.0.0.1 are working, so there must be an issue with Shrew 2.1.5. As describben there are sometimes one positiv 'Ping', but later on only time outs.... Linux system in host subnet seems to be not affected (Synology-NAS, router itself, ThinClient), only the Windows systems!?
Best regards, Christoph > [email protected] wrote on Monday, July 26, 2010 8:41 > PM: On Sat, 24 Jul 2010 22:42:44 +0200 > "Karnin" <[email protected]> wrote: >> ## Client: >> Windows XP Sp3 >> Shrew VPN client version = 2.1.5 >> Fritz!Box 7170 with DYNDNS.ORG-dynamic IP, ADSL >> with Firmware 29.04.80 >> Client-subnet 192.168.112.0 >> >> ## Host: >> Draytek Vigor 2710 with DYNDNS.ORG-dynamic IP, ADSL >> with Firmware 3.3.5 Standard for AnnexB >> Host-subnet 192.168.215.0 >> >> ## Setup according to: >> http://draytek.de/Beispiele/VPN/ShrewSoft_Client.pdf >> > Hi Christoph, > I may be wrong about this, but on the last page of the PDF it > specifies > the destination networks to send traffic to (Shrew config > Profile tab), > and lists 192.168.1.0/255.255.255.0. However, looking at your > configuration above (Host-subnet 192.168.215.0), I think that > you should > tell it to tunnel traffic to 192.168.215.0/255.255.255.0 > instead (or as > well). _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
