On 9/28/2010 8:45 AM, Sławomir Krok wrote:
Hi
I was able to solve this on my own. Problem was actually caused by
Alcatel-Lucent IP Sec client which was on the same PC. Even when it was
off, there were few services working and blocking Shrew. This was a bit
of suprise because in past I was using Alcatel client with e.g. Cisco
and Junier clients on the same PC and all of them worked fine.
So, after uninstalling Alcatel client I could ping remote hosts, and
remote doktop works fine too.
Thanks for the followup post. Different VPN Clients capture and process
IKE and IPsec traffic differently. We have invested a lot of time into
making sure our VPN client doesn't interfere with other clients that may
be installed ( only install divert rules for specific peer IP's and only
process traffic which match our specific IPsec SA identifiers ).
However, other VPN clients aren't nearly as accommodating and will try
to process traffic that it shouldn't. This can cause the Shrew Soft VPN
client to work incorrectly. Its all very implementation specific.
-Matthew
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
