HI, after solving the compile-problem, I could establish a tunnel to the network behind the Fritz!Box 7270 through the internet.
This is what ikec puts out: config loaded for site 'ms2.vpn' attached to key daemon ... peer configured iskamp proposal configured esp proposal configured ipcomp proposal configured client configured local id configured remote id configured pre-shared key configured bringing up tunnel ... network device configured tunnel enabled But before I can use the tunnel I'll have to ping one IP-adress in the foreign network, e.g. the Fritz!Box oder one of the network-printers. The first ping don't reaches the foreign network but the second does, like this example shows: PING 192.168.0.253 (192.168.0.253) 56(84) bytes of data. 64 bytes from 192.168.0.253: icmp_seq=2 ttl=64 time=52.9 ms --- 192.168.0.253 ping statistics --- 2 packets transmitted, 1 received, 50% packet loss, time 999ms rtt min/avg/max/mdev = 52.923/52.923/52.923/0.000 ms After the second ping (the "reciebed ping") I can use the network as it should be. For now, I start the tunnel with a bash-script that pings the foreign network after establishing the tunnel. But this is only a workaround. Is the "ping-problem" a known problem? I use the newest version of shrew. Bye Andreas -- Dipl.-Ing. Andreas Hoppe An der Acher 35 77855 Achern T.: 07841 / 601975 _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
