Windows Firewall on the remote Windows 7 machine was the problem. Anyone
familiar with the right magic settings to set up exceptions in Windows 7
firewall? Thanks...
Glenn
On 10/25/2010 4:19 AM, [email protected] wrote:
Zitat von Glenn Olsen <[email protected]>:
Hello,
I am running the latest version of the VPN client, 2.1.7, on a
Windows 7 machine through a Netgear FVS338 running latest firmware,
3.0.6-25. Negotiation and connection are successful. I am able to
reach most of the resources on our internal network, but there is a
small range of IP addresses that I am not able to reach (ping or by
any other means). I am looking for some guidance on debugging this
issue, the trace utility looks normal, but I am not sure how to go
deeper to determine what the problem is. Thanks...
Have you checked the obvious:
- Host based Firewall at the machines in question which does not allow
ping
- Special routing on the machines not answering
- Net-mask settings in the VPN Tunnel config
Regards
Andreas
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
