Hi Kevin, Yes, it work but you should not use the Xauth & ModeConfig (no available in FVS318v1)
Regards, On Sat, Nov 13, 2010 at 11:19 PM, Kevin Pickard <[email protected]>wrote: > I take it no-one else has any experience with this? Andreas was the > only one to respond but his FVS318 appears to be a newer version and is > completely different from mine. I have the older v1 hardware (FVS318v1). > Anyone? > > At 16:59:21 2010-10-26, [email protected] wrote: > >Message: 2 > >Date: Tue, 26 Oct 2010 16:59:21 +0200 > >From: [email protected] > >Subject: Re: [vpn-help] Netgear FVS318 > >To: [email protected] > >Message-ID: <[email protected]> > >Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"; > > DelSp="Yes" > > > >Zitat von [email protected]: > > > >> Hello. Does anyone know if the Shrew client will work with the > >> Netgear FVS318 router? > >> > >> I have scanned the archives and I have found references to the > >> FVG318 but nothing specific about the FVS318. I have seen references > >> to needing Mode and Xauth enabled to get the FVS318 to work but > >> neither of those options exist on the FVS318 (that I can find). So I > >> think those people are confusing the FVS318 with another model. > >> > >> Has anyone been able to get the Netgear FVS318 (V1 hardware > >> running V2.4 firmware) to work with the Shrew client? > >> > >> My initial attempts at trying various configurations have only > >> resulted in security warnings on my FVS318 indicating that UDP > >> packets (from the Shrew Client) are being tossed because they > >> contain 'Suspicious UDP Data'. I have configured to use PSK. On the > >> client > >> side, via Wireshark, I only see the ISAKMP packet being sent out > >> (this is the one being tossed by the FVS318) at 5 second intervals. > >> The > >> Shrew client itself shows "bringing up tunnel ...", then eventually > >> followed by "negotiation timout [sic] occurred" after the ISAKMP > >> packet has been sent 4 times. > > > >Only some guess: > >If the netgear has some form of firewall you maybe need to allow > >inbound UDP port 500 and if using UDP encapsulation port 4500 as well > >to get the tunnel up. > > > >Regards > > > >Andreas > > > > > >-------------- next part -------------- > >A non-text attachment was scrubbed... > >Name: smime.p7s > >Type: application/pkcs7-signature > >Size: 6046 bytes > >Desc: S/MIME Cryptographic Signature > >URL: < > http://lists.shrew.net/pipermail/vpn-help/attachments/20101026/6b0c93e4/attachment-0001.bin > > > > > >------------------------------ > > > >_______________________________________________ > >vpn-help mailing list > >[email protected] > >http://lists.shrew.net/mailman/listinfo/vpn-help > > > > > >End of vpn-help Digest, Vol 49, Issue 25 > >**************************************** > > -----------------------------------~~~~~~~----------------------------- > Doing what you love is Freedom. | o o | Kevin Pickard > Loving what you do is Happiness. | ^ | [email protected] > ------------------------------^^^-----------^^^------------------------ > > _______________________________________________ > vpn-help mailing list > [email protected] > http://lists.shrew.net/mailman/listinfo/vpn-help >
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
