I am currently using a Windows XP Home edition laptop with ShrewSoft VPN Client
2.1.7 installed. I am connecting to an offsite Adtran NetVanta 3448. The
NetVanta 3448 is configured with the settings recommended from the shrew
support website. I load the policy and access manager says that I am
connected. My laptops ipconfig -all shows the virtual adapter with a
192.168.5.1 address with the correct dns server, but I cannot ping anything on
the internal network that I'm trying to connect to. Any help with this would
be great. The access manager is giving me this output:
Under the Connect tab:
Config loaded for site '64.89.121.74'
Configuring client settings....
Attached to key daemon...
Peer configured
Iskamp proposal configured
Esp proposal configured
Client configured
Local id configured
Remote id configured
Pre-shared key configured
Bringing up tunnel....
Network device configured
Tunnel enabled
Under the Network tab:
Security associations
Established - 0
Expired - 0
Failed - 1
Tunnel:
Status - Connected
Remote Host - 64.89.121.74
Transport Used -NAT-T/IKE|ESP
IKE Fragmentation -Disabled
Dead Peer Detection -Enabled
I am also using the Trace Utility and capturing this:
Under the Secuirty Policy tab:
8 IN 64.89.121.74/32 192.168.22.85/32
NONE
9 OUT 192.168.22.85/32 64.89.121.74/32
NONE
10 IN 192.168.22.1/332 192.168.5.1/32
NONE
11 OUT 192.168.5.1/32 192.168.22.1/32
NONE
12 IN 192.168.0.0/24 192.168.5.1/32
IPSEC
ESP/TUNNEL/64.89.121.74-192.168.22.85/UNIQUE:1
13 OUT 192.168.5.1/32 192.168.0.0/24
IPSEC
ESP/TUNNEL/192.168.22.85-64.89.121.74/UNIQUE:2
Under the Firewall Rules tab:
0 2/2 RECV DIVERT IP/UDP
64.89.121.74:IKE 192.168.22.85:85
1
1 2/2 RECV DIVERT IP/UDP
65.89.121.74:NATT 192.168.22.85:NATT 42
2 3/0 SEND MIRROR ARP
ANY ANY
4
3 4/9 SEND ACCEPT IP
ANY 64.89.121.74
0
4 4/11 SEND ACCEPT IP
ANY 192.168.22.1
0
5 4/13 SEND DIVERT IP
192.168.5.1 192.168.0.0/24
0
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
