Hi All

I'm trying to access a Cisco VPN using the shrew VPN client v2.1.7 on Fedora 14 
(2.6.35.10-74.fc14.x86_64). The VPN client seemingly establishes a successful 
connection, but host names can't be resolved. This same version of the VPN 
client works fine on Oracle Enterprise Linux (2.6.18.xx) from which I wanting 
to move from. The iked log file is attached, and some other information 
follows. So, after establishing a VPN connection, trying to ping a host name 
just times out saying that the host is unknown. I can't ping the name servers 
either. I can ping my local router though. Immediately after disconnecting 
shrew, normal network access is restored (I can reach the internet etc.).

Any ideas?

>>>>
[r...@homev01 log]# ping dingbat
ping: unknown host dingbat
[r...@homev01 log]# ip route
203.57.223.253 via 10.1.1.1 dev eth0  proto static 
158.155.68.64/26 dev tap0  proto kernel  scope link  src 158.155.68.67 
10.1.1.0/24 dev eth0  proto kernel  scope link  src 10.1.1.3  metric 1 
default via 158.155.68.67 dev tap0  proto static 
default via 10.1.1.1 dev eth0  proto static 
[r...@homev01 log]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:8C:A4:8F:15  
          inet addr:10.1.1.3  Bcast:10.1.1.255  Mask:255.255.255.0
          inet6 addr: fe80::224:8cff:fea4:8f15/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9441 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10371 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:8215801 (7.8 MiB)  TX bytes:1575491 (1.5 MiB)
          Interrupt:18 

eth1      Link encap:Ethernet  HWaddr 00:24:8C:A4:8F:14  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:17 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:97 errors:0 dropped:0 overruns:0 frame:0
          TX packets:97 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:8861 (8.6 KiB)  TX bytes:8861 (8.6 KiB)

tap0      Link encap:Ethernet  HWaddr 42:66:39:BB:52:13  
          inet addr:158.155.68.67  Bcast:158.155.68.127  Mask:255.255.255.192
          inet6 addr: fe80::4066:39ff:febb:5213/64 Scope:Link
          UP BROADCAST RUNNING  MTU:1380  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:500 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

[r...@homev01 log]# cat /etc/resolv.conf
domain  bri.intecbilling.com
nameserver      158.155.73.17
nameserver      158.155.73.16
# Generated by NetworkManager
[r...@homev01 log]#
>>>>

Regards
Wayne.

Attachment: iked.log.gz
Description: GNU Zip compressed data

_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help

Reply via email to