I'm only using infrastructure networks, however I have used ad-hocs in the past.
If I disable the Virtual Miniport adapter, either the entire adapter or just the shrewsoft filter component, 2.2.0 will then immediately connect fine. I can even re-enable the Miniport adapter/filter and still I'm able to connect. However, if I reboot and the Virtual Miniport adapter is enabled, it cannot connect again until I disable it again. If I leave it disabled, all is good. Thanks! -------- Original Message -------- Subject: Re: [vpn-help] 2.2 b1 miniport adapter From: Matthew Grooms <[email protected]> Date: Sun, February 06, 2011 4:14 pm To: [email protected] Cc: [email protected] On 2/6/2011 11:44 AM, [email protected] wrote: > Win7/32 Can't establish a tunnel (doesn't even make an attempt to > establish) if the Virtual Miniport adapter is enabled. Disabling it > allows it to function and establish a tunnel. > > 2.17 works with the virtual miniport enabled. > > Any workaround or is it broken? > Hmmm. It should be the other way around unless you are communicating over an AD-Hoc Wifi network. The 2.2.0 version favors the base Wifi adapter but doesn't work the MS Virtual Adapter used for AD-Hoc Wifi. -Matthew _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
