On 2/14/2011 5:43 PM, Vaclav Brozik wrote:
Hello, I am testing Shrew Soft VPN Client 2.1.7 on Windows Vista SP2 32 bit. The VPN gateway is some Cisco device. It introduces itself as Cisco Systems, Inc ASA5520-K8. The IKE negotiation completes successfully and successful keep-alive packet exchange follows. Unfortunately no traffic passes the established VPN tunnel. It looks like there is an ARP or routing problem.
...
ARP request sent from the Shrew Soft Virtual Adapter does not appear in the log at all! It seems that the VPN client does not see the ARP request. Also the "transferred" counters of the IPsec Security Associations stay at 0 all the time. I tried a different internet connection (dialup over GPRS) too - no success. Am I missing something in the VPN client or Windows configuration or could this be a bug in the VPN client?
What does the debug level log output look like? Do you see a phase2 negotiation at all?
http://www.shrew.net/support/wiki/BugReportVpnWindows -Matthew _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
