Zitat von Dirk Wahrheit <[email protected]>:
Hi,
I am using a Funkwerk (Former Bintec) R4100 with latest SW-Release
V.7.9 Rev. 5 (Patch 5) IPSec from 2011/02/04 00:00:00
When I connect with the Shewsoft Client V.2.1.7 the Router crashes
totally and reboots.
Connections from Old Bintec IPSec Client and NCP Client are fine.
Settings for Shewsoft Client from (german with English screenshots):
http://www.router-forum.de/board-bintec-funkwerk-enterprise-communications/thread-ipsec-bintec--lt---gt--shrew-soft-client-51944-page-1.html
Settings for R4100 as given in the Article (german):
http://www.funkwerk-ec.com/faq_bintec_262_ipsecclient_zu_r3000_ikeconfigmode_fci_01_de,10993,194.html
Any Ideas?
debug log from Funkwerk R4100 console:
16:45:31 DEBUG/IPSEC: P1: peer 0 () sa 3 (R): new ip 79.197.214.162
<- ip 178.26.9.170
16:45:31 INFO/IPSEC: P1: peer 0 () sa 3 (R): Vendor ID:
178.26.9.170:500 (No Id) is 'draft-ietf-ipsec-nat-t-ike-00'
16:45:31 INFO/IPSEC: P1: peer 0 () sa 3 (R): Vendor ID:
178.26.9.170:500 (No Id) is '16f6ca16e4a4066d83821a0f0aeaa862'
16:45:31 INFO/IPSEC: P1: peer 0 () sa 3 (R): Vendor ID:
178.26.9.170:500 (No Id) is 'draft-ietf-ipsec-nat-t-ike-02'
16:45:31 INFO/IPSEC: P1: peer 0 () sa 3 (R): Vendor ID:
178.26.9.170:500 (No Id) is 'draft-ietf-ipsec-nat-t-ike-03'
16:45:31 INFO/IPSEC: P1: peer 0 () sa 3 (R): Vendor ID:
178.26.9.170:500 (No Id) is '4a131c81070358455c5728f20e95452f'
16:45:31 INFO/IPSEC: P1: peer 0 () sa 3 (R): Vendor ID:
178.26.9.170:500 (No Id) is '4048b7d56ebce88525e7de7f00d6c2d380000000'
16:45:31 INFO/IPSEC: P1: peer 0 () sa 3 (R): Vendor ID:
178.26.9.170:500 (No Id) is 'Dead Peer Detection (DPD, RFC 3706)'
16:45:31 INFO/IPSEC: P1: peer 0 () sa 3 (R): Vendor ID:
178.26.9.170:500 (No Id) is 'f14b94b7bff1fef02773b8c49feded26'
16:45:31 INFO/IPSEC: P1: peer 0 () sa 3 (R): Vendor ID:
178.26.9.170:500 (No Id) is '166f932d55eb64d8e4df4fd37e2313f0d0fd8451'
16:45:31 INFO/IPSEC: P1: peer 0 () sa 3 (R): Vendor ID:
178.26.9.170:500 (No Id) is '8404adf9cda05760b2ca292e4bff537b'
16:45:31 INFO/IPSEC: P1: peer 0 () sa 3 (R): Vendor ID:
178.26.9.170:500 (No Id) is '12f5f28c457168a9702d9fe274cc0100'
16:45:31 DEBUG/IPSEC: P1: peer 3 (MAC_Schwanke-Seer) sa 3 (R):
identified ip 79.197.214.162 <- ip 178.26.9.170
16:45:31 DEBUG/INET: NAT: new incoming session on ifc 10001 prot 17
79.197.214.162:4500/79.197.214.162:4500 <- 178.26.9.170:4500
รจ Here Router crashes and reboots
Contact Funkwerk Support. Nothing ever sent by a VPN client should
crash the VPN router. We have a BinTEC VPN-25 and no problem with
Shrewsoft VPN clients.
Regards
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
