Hi ShrewSoft Team, I'm trying to get the ShrewSoft VPN client to work with my Juniper SSG20 (Firmware v6.1), but am encountering errors when I try to connect.
I've exactly followed the directions here: http://www.shrew.net/support/wiki/HowtoJuniperSsg When setting up the VPN client config, I used the example config file and just tweaked the user/pass/presharedkey/ids/IP settings to match my setup: http://www.shrew.net/static/howto/JuniperSsg/juniperssg.vpn But when trying to connect, the ShrewSoft VPN client says this: bringing up tunnel ... negotiation timout occurred tunnel disabled detached from key daemon ... And the Juniper logs says this: Rejected an IKE packet on ethernet0/0 from 99.99.99.99:500 to88.88.88.88:500 with cookies 7393deb8306c7e69 and 0000000000000000 because an initial Phase 1 packet arrived from an unrecognized peer gateway. It is the same issue that a few people have reported on this forum here, so it seems to not be a completely unique problem http://forums.juniper.net/t5/ScreenOS-Firewalls-NOT-SRX/VPN-clients-for-64-bit-OS-I-continue-to-get-phase-1-errors/td-p/35123 I would really love some help with this issue, as I don't have a whole lot of sys admin experience and can't find much documentation online - any advice at all would be helpful. I've posted all my system details below. Many thanks -Marcus //////////////////////////// // SYSTEM DETAILS //////////////////////////// *VPN Client Version* ShrewSoft VPN Client 2.1.7 *Windows OS Version* Win7 Professional 32bit *Gateway Make/Model?* Juniper SSG20 *Gateway OS Version* Hardware Version: 710(0) Firmware Version: 6.1.0r2.0 (Firewall+VPN)
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
