On Wed, 27 Apr 2011 13:03:01 +0100 (BST) Daniel Humphreys <[email protected]> wrote:
> > The problem is that when I am connected to the customer network using > the VPN client application (and after a few minutes) I lose my > internet and LAN connection. I can only presume that this is > because, by default the ShrewSoft VPN client application > automatically tunnels all traffic through the VPN connection. I know > there is an option to switch off the "Tunnel All" option on the > Policy tab of the application and enter a Remote Network Resource (to > "Include" or "Exclude") as "Address" and "Netmask" IP addresses > however I am not sure what I need to enter here. > > Connection-specific DNS Suffix . : ***.*** > Link-local IPv6 Address . . . . . : fe80::8de3:9dbe:393a:33ba%11 > IPv4 Address. . . . . . . . . . . : 150.237.13.17 > Subnet Mask . . . . . . . . . . . : 255.255.255.0 > Default Gateway . . . . . . . . . : 150.237.13.1 > Hi Dan, Tunnel All is what is preventing you from accessing the Internet and your Local LAN. Unfortunately, you may not have a choice to not tunnel all, as it depends on what your customer's gateway is expecting. If the gateway is expecting you to connect with a remote network of 0.0.0.0/0.0.0.0 (which is tunnel all), then it will not let you connect with something different. Since you can connect successfully, I would suggest that this is in fact what the customer's gateway is configured for. To maintain local lan access while connected, you can change your Shrew config. Unselect Tunnel All, then add: exclude 150.237.13.0/255.255.255.0 include 0.0.0.0/0.0.0.0 I don't know a workaround for the loss of internet access, that's an effect of routing everything to the customer's network. _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
