Hi, Am 28.04.2011 um 04:57 schrieb kevin vpn: > ... >> 12:48:25 ii : resend limit exceeded for phase2 exchange > > Hi Alexander, > > The connection is failing in the phase2 exchange process. You'll need > to double-check your settings on the gateway and in the client. > Posting the log from the gateway could help us debug things for you. > > You could try disabling PFS to simplify things a little bit
I disabled PFS, but the result is the same. Here is the log from the router: [09/May/11 21:07:05] @sys WAN(PPPoE) IP is 62.226.52.249[09/May/11 21:09:11] @sys Get current time from NTP server : May 09 2011 Mon. 21:09:11[09/May/11 21:10:33] @in UDP from 85.22.14.23:500 to 62.226.52.249:500 [09/May/11 21:10:33] IKE[6] Rx << MM_I1 : 85.22.14.23 SA, VID, VID, VID, VID [09/May/11 21:10:33] IKE[6] Tx >> MM_R1 : 85.22.14.23 SA [09/May/11 21:10:33] IKE[6] ISAKMP SA CKI=[b8d1581b 4cea1bab] CKR=[1cf5e5d0 1f2e0499] [09/May/11 21:10:33] IKE[6] ISAKMP SA DES / MD5 / PreShared / MODP_768 / 3600 sec (*0 sec) [09/May/11 21:10:34] IKE[6] Rx << MM_I2 : 85.22.14.23 KE, NONCE [09/May/11 21:10:34] IKE[6] Tx >> MM_R2 : 85.22.14.23 KE, NONCE [09/May/11 21:10:35] This connection request matches tunnel 1 setting ! [09/May/11 21:10:35] IKE[1] Rx << MM_I3 : 85.22.14.23 ID, HASH [09/May/11 21:10:35] IKE[1] Tx >> MM_R3 : 85.22.14.23 ID, HASH [09/May/11 21:13:17] @sys WAN(PPPoE) IP is 62.226.47.244[09/May/11 21:14:08] @sys Get current time from NTP server : May 09 2011 Mon. 21:14:08[09/May/11 21:14:51] @in TCP from 85.22.14.23:59699 to 192.168.6.200:22 Regards, Alexander _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
