On 5/8/2011 4:50 PM, VINCE P CARTER wrote:
Has anyone had any experience using the Shrew Soft vpn client (2.1.7)
with a Symantec SGS 440 gateway? The Symantec client is not compatible
with Windows 7, and so I have successfully installed the Shrew soft vpn
client (64-bit OS), but I can't seem to get the client to connect to the
gateway. I get the following when I try to connect:
config loaded for site 'nnn.nnn.nnn.nnn'
configuring client settings ...
attached to key daemon ...
peer configured
iskamp proposal configured
esp proposal configured
client configured
local id configured
remote id configured
pre-shared key configured
bringing up tunnel ...
negotiation timout occurred
tunnel disabled
detached from key daemon ...
I suspect it is failing on the Phase1 authentication, but I am not sure
what parameters it is looking for. Any thoughts?
Have a look at the debug log output ...
http://www.shrew.net/support/wiki/BugReportVpnWindows
-Matthew
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
