On Wed, 1 Jun 2011 17:14:23 -0400 (EDT) [email protected] wrote: > Hi, > > I followed the guide on how to configure a Linksys RV042 for VPN > connections found at http://www.shrew.net/support/wiki/HowtoLinksys. > However I am unable to connect via the Access Manager. It gets hung > up on `Bringing up tunnel...` and after a while I get the > `negotiation timeout occured` error. I ran the VPN Trace and the > following was the output: > > ... > 11/06/01 16:55:16 -> : send IKE packet 192.168.37.25:500 -> > 72.66.190.196:500 ( 499 bytes ) > 11/06/01 16:55:16 DB : phase1 resend event scheduled ( ref count = 2 ) > 11/06/01 16:55:21 -> : resend 1 phase1 packet(s) 192.168.37.25:500 -> > 72.66.190.196:500 > 11/06/01 16:55:26 -> : resend 1 phase1 packet(s) 192.168.37.25:500 -> > 72.66.190.196:500 > 11/06/01 16:55:31 -> : resend 1 phase1 packet(s) 192.168.37.25:500 -> > 72.66.190.196:500 > 11/06/01 16:55:36 ii : resend limit exceeded for phase1 exchange ... >
Hi rbarlow, The Shrew log suggests that there is no response coming back to Shrew from the router at all. Are you able to get log output from the Linksys? If you can get logs from the Linksys, we might be able to see if the Shrew connections are making it to the router, and if they are, why the router is not responding. _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
