On 07/05/2011 05:06 AM, Gergely Kiss wrote:
Dear List!
I'm having problems while connecting to a Juniper SRX210 firewall
running JunOS 11.1R1.10. I'm using the latest stable Shrewsoft client
(2.1.7) on Windows 7 (but the issue happens on Windows XP, too).
If I try to connect from a device with a public IP-address, like a
mobile broadband connection (without using NAT-T), everything works
perfectly, but if I connect through a NAT device (Linksys WRT54GS), the
connection works only for 6-7 minutes and then it terminates with no
particular reason (the error message is: "session terminated by gateway").
...
I already tried debugging both ends, but I found nothing helpful in the
logs (except some "config packet ignored" messages on the client). I
already tried upgrading to the latest beta release (2.2.0-beta-1), but
the issues still exists.
Hi Gergely,
It might be that the Dead Peer Detection is somehow failing... that
usually is 5 minutes or so. When you did the debug trace, did you see
DPD messages (DPDV1-R-U-THERE) going back and forth?
You could try disabling Dead Peer Detection in the Shrew site
configuration...
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
