Hi, Screen OS 5.4.0.r8 is such as old so I suggest you upgrade the NS first.
Regards Christian Krackowizer > -----Ursprüngliche Nachricht----- > Von: [email protected] [mailto:vpn-help- > [email protected]] Im Auftrag von Johan Schröder > Gesendet: Samstag, 15. Oktober 2011 13:39 > An: [email protected] > Betreff: *****POSSIBLE SPAM***** [vpn-help] Problem with tunnel from > Shrewsoft Client to Juniper NS 5GT > > Hello there, > > I've a problem with a VPN tunnel using the Shrewsoft VPN-Client (current > windows version) and a Juniper Netscreen 5GT (OS 5.4.0.r8) on a WIndows > 7 system. I've configured the client and the gateway as described at > http://www.shrew.net/support/wiki/HowtoJuniperSsg. > > The tunnel established without problems and my client gets an local IP > address from the right IP Pool on the netscreen. The problem is that no > machine in the VPN LAN could be reached, not even a ping. Only a ping to > my machine and to the gateway (Netscreen) IP address is successfully. > > When I try ipconfig /all, I get these values > > IPv4 address . . . . . . . . . . : 192.168.0.240(Vorläufig) > Subnetmaske . . . . . . . . . . : 255.255.255.255 > Default gateway . . . . . . . . . : > > The IP net on the getway side is 192.168.0.0/24. > > It seems to my that there could might be problem, because of the given > subnetmask (I think it should be /24 and not /32) and there is no > default gateway assigned. > > Do you have any idea? > > Regards, > Johnson > _______________________________________________ > vpn-help mailing list > [email protected] > http://lists.shrew.net/mailman/listinfo/vpn-help _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
