Hi Tamas,
thanks for you answer but It doesn't not work !!
It only works for one network ...
I use shrewsoft 2.2 ... and try to connect to a zywall usg 100 ...
When I put for example, 192.168.1.0/24 as local policy in the zywall (
phase 2 ) ... And 192.168.1.0 / 255.255.255.0 in the policy tab .. ..I
works very well
But if i put a RANGE of ip adresse in the zywall like ,
192.168.1.0-192.168.3.0 ... And try to add 192.168.1.0 /
255.255.255.0,192.168.2.0 / 255.255.255.0, 192.168.3.0 / 255.255.255.0
in the policy tab
Il doesn't work !!! I can't contact networks
Any Idea ?
Thanks a lot for your help
Stéphane
Le 18/10/2011 16:14, Uracs Tamás a écrit :
Hi Stéphane,
specify these networks in the policy tab of the shrew policy.
KR,
Tamas
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Stéphane PERON
Sent: Tuesday, October 18, 2011 2:55 PM
To: [email protected]
Subject: [vpn-help] Accessing several networks
Hi all,
How can I configure Shrewsoft in order to join several networks ?
for example : 192.168.1.0, 192.168.11.0 and 192.168.15.0
With the greenbow client, I can specify a range of addresses .. How could I do
the same in Shrewsoft ?
Thanks for help
Cheers
Stéphane
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
