On 12/06/2011 07:50 PM, Steve Campbell wrote:
All: Wondering if anyone has seen where the client connection
establishes but the default gateway does not show up in the routing
table (route print). When connected with other vpn clients sw the
default gateway is added to the client routing table with the vpn
client address. When I connect with the shrewsoft client the default
gateway is not added and the traffic is routed via the dhcp primary
address. I see no esp traffic (using wireshark). Any insight to this
would be much appreciated. thanks SC
Hi Steve,
I would suggest that if the routing table is unchanged, then a tunnel
policy may not have been established between the client and the gateway.
If you take a trace, it can tell us what IP ranges/routes were
negotiated as part of the tunnel during connection:
http://www.shrew.net/support/wiki/BugReportVpnWindows
Also, if you're using Shrew on a laptop that also has the Microsoft
Virtual WiFi Miniport adapter installed, you should make sure you're
running version 2.2.0 beta 2 as it corrects a conflict between Shrew and
the Virtual WiFi adapter.
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
