Hi, I have a Linux box with no X server / qt libraries. Is it possible with this application to connect to a VPN Server (it's a sidewinder appliance) via command-line (without using vpn access manager gui)?
The working site configuration (generated through the gui using another linux machine) is the following: n:version:2 s:network-host:x.y.z.w n:network-ike-port:500 s:client-auto-mode:pull s:client-iface:virtual n:network-mtu-size:1380 n:client-addr-auto:1 s:network-natt-mode:enable n:network-natt-port:4500 n:network-natt-rate:15 s:network-frag-mode:enable n:network-frag-size:540 n:network-dpd-enable:1 n:network-notify-enable:1 n:client-banner-enable:1 n:client-dns-used:1 n:client-dns-auto:0 s:client-dns-addr:192.168.0.57 s:client-dns-suffix:consoft.it s:auth-method:mutual-rsa s:ident-client-type:asn1dn s:ident-server-type:asn1dn s:auth-server-cert:/root/.ike/Firewall.pem s:auth-client-cert:/root/.ike/User.pem s:auth-client-key:/root/.ike/User.p12 s:phase1-exchange:main n:phase1-dhgroup:0 s:phase1-cipher:3des n:phase1-keylen:0 s:phase1-hash:sha1 n:phase1-life-secs:3600 n:phase1-life-kbytes:0 n:vendor-chkpt-enable:0 s:phase2-transform:3des n:phase2-keylen:0 s:phase2-hmac:sha1 n:phase2-pfsgroup:-1 n:phase2-life-secs:700 n:phase2-life-kbytes:0 s:ipcomp-transform:disabled s:policy-level:auto n:policy-nailed:0 n:policy-list-auto:1 Maybe is it possible properly configuring the iked.conf file? Thanks in advance.
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
