Ok, this one is kinda puzzling us. We've run into a situation using the mac build for 2.1.7 where we can connect to our vpn when we're connected over wireless, but not when it's connected via a wired connection. We're using the same config file on both pc's and mac's, and have had no problems at all with the pc's, and as I said, when using a wireless connection it's working fine on the mac. But we've now tried three different mac machines, and all of them work on wireless, and not on wired using the same config.
What seems to happen is that we'll get a connection, and to the "Tunnel enabled" part, but then either as soon as we try to send traffic across, or 15 seconds after we've connected, we get network unavailable, and it drops. On the wired mac, it seems unable to establish the phase 2 portion (on all other setups, when we try sending traffic across, our juniper firewall logs the phase 2 connection established). We get no error messages on the firewall side with the wired mac, just never any evidence that it attempts to establish the phase 2. All the logs on the firewall up to that point are identical across all our configs. So, anyone have any thoughts on what we're missing about what's different with the wired connection on a Mac? Thanks, Gary _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
