On 03/09/2012 08:14 AM, Comtois, Luc wrote:
Hello,
<snip>
I am having a issue creating a vpn between my Windows 7 Enterprise
sp1 32bit machine with Shew Soft vpnclient ver 2.1.7 and my Juniper
SSG-140 ver 6.3.0r9.0.
I followed the procedure
http://www.shrew.net/support/wiki/HowtoJuniperSsg and read a bunch of
post about similar issues but I am unable to make it work.
On the firewall I am getting this error message:
Rejected an IKE packet on ethernet0/0 from x.x.x.x:500 to y.y.y.y:500
with cookies 0568dc4dfbfdf45c and 0000000000000000 because an initial
Phase 1 packet arrived from an unrecognized peer gateway.
Hi Luc,
That message means that the VPN gateway did not recognize the Shrew
client. It identifies itself using the Local Identity on the
Authentication tab in the Site Configuration. This suggests a mismatch
between what Shrew is sending and what the gateway is expecting.
There is a typo in the SSG Howto that would cause this error. See this
post for details:
http://lists.shrew.net/pipermail/vpn-help/2011-March/003622.html
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
