On 04/04/2012 08:26 AM, Michael Wade wrote:
<snip>
We can establish the VPN, but when we try to ping the VPN gateway
(172.20.4.1) we get a message from the local client gateway (10.100.1.x)
that the destination host is unreachable. Pings to VPN side IP's fail.
<snip>
Route
IPv4 Route Table
========================================================================
===
Active Routes:
Network Destination Netmask Gateway Interface
Metric
0.0.0.0 0.0.0.0 192.168.25.1 192.168.25.57
10
<snip>
172.20.4.0 255.255.255.0 On-link 10.100.1.12
31
<snip>
We've tried ripping out all of the network adapters, clearing the
routes, reinstalling the software, but can't get anywhere with it. Any
help would be appreciated.
Hi Michael,
I think the problem is that your default route (0.0.0.0) has a lower
metric than the Shrew/VPN routes. See if this thread helps you resolve
the issue:
http://lists.shrew.net/pipermail/vpn-help/2011-September/003996.html
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
