Hi Kevin and everyone else watching this, I'll try to answer the simple questions first and will grab a copy of configuration file and logs tomorrow morning. (it's 3am here)
The error message appears inside the vpn trace utility on the client. As far as xauth goes, I know that we have no individual user authentication via xauth. Pushing IP configuration via xauth is a feature I've not heard of yet, but I'll investigate that part if that's possible independent of authentication via xauth. -- Gruß, Benedikt Bauer Kevin VPN <[email protected]> schrieb: On 05/14/2012 08:25 PM, Benedikt Bauer wrote: > Hello everyone, > > I've got a strange problem/situation I don't understand. > IKE Phase 1 is established successfully, but my Phase 2 is rejected > because no matching inbound policy can be found. > The connection general tab is set to use a virtual adapter and when the > adapter should automatically assign an IP address the VPN Client doesn't > seem to set the correct security policies itself. > > Remote LAN is 192.168.0.0/24, local LAN is 192.168.99.0/27 > The VPN Client always trys to assign 192.168.99.16 to the virtual adapter. > > If I assign anything but 192.168.99.16/32 to the virtual adapter IKE > Phase 2 fails. > > I've got another 2 computers with The Greenbow VPN Client that work fine > and both of them have not assigned any static IP address to their > virtual adapter. (VPN Client Address: 0.0.0.0) > Can anyone explain to me why that doesn't work with automatically > assigned IPs instead of static IP? > Hi Benedikt, I would guess that you've somehow got the Shrew configuration setup incorrectly, but that is just a guess. The fail message about "no matching inbound policy can be found" - is that shown on the Shrew client or the VPN gateway logs? Do you use XAUTH on the gateway to push the IP configuration to the client - if so, have you configured Shrew to expect XAuth (under Authentication tab -> Authentication Method)? Are you able to send us a copy of your Connection configuration as well as a log file so we can help sort this out? Instructions for generating the log file are here: http://www.shrew.net/support/wiki/BugReportVpnWindows _____________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
