Hi Kevin, Someone on the list sent me an email saying that he had successfully setup the client without modeconfig on the exact same router I had but he had used v2.15. I tried it with that version and it worked fine. The important thing to remember is to change Auto Configuration (in the General tab) to disabled. Thanks for your response.
Regards Mark Verhyden On Jul 19, 2012, at 1:00 PM, [email protected] wrote: > > > Message: 2 > Date: Wed, 18 Jul 2012 22:33:29 -0400 > From: Kevin VPN <[email protected]> > Subject: Re: [vpn-help] Netgear setup FVS336GV2 > To: [email protected] > Message-ID: <[email protected]> > Content-Type: text/plain; charset="ISO-8859-1"; format=flowed > > On 07/16/2012 09:09 PM, Mark Verhyden wrote: >> Hi, >> >> I have tried several times to get it up and running with the >> Shrewsoft Client and a Netgear FVS336GV2. This is a brand new setup >> so to speak. I know the basics are working as I have IPSecuritas >> working for the Macs and I've been able to get the Trial version of >> the Netgear app running. But I am not using mode config for those. >> >> I had tried numerous times to get the Shrewsoft client up and running >> using the link you all have for Netgear and have been unsuccessful. >> My question is will that work if I do not configure Mode Config >> Record. TIA >> > > Hi Mark, > > I don't have any experience with setting up Netgear devices, but I think > I recall seeing comments on the list regarding problems with Netgear > when Mode Config/modecfg is not used. It's possible that it does not work. > _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
