Hi Kevin,
thank you very much for all the hints and instructions! Some comments see directly below your questions I'll test with wireshark as soon as i can. Regard's, David On Sat, 18 Aug 2012 13:48:15 -0400, Kevin VPN wrote: > On 08/16/2012 05:33 AM, [email protected] [1]wrote: > >> Hi Kevin, thank you for your respond. And the answer is no: No packets are reaching the gateway. So currently i guess, that the "Shrew virtuel Adapter" is the reason bacause it get's not enabled while i try to establish the connection. I cannot see any error messages. The Win7 machine - SP1 with all patches - is standalone / no domain and it's an out of the box installation - no other software on it. Regards, David On Wed, 15 Aug 2012 22:31:03 -0400, Kevin VPN wrote: >> >>> On >> 08/03/2012 10:11 AM, Bestellungen wrote: >> >>>> Hi all, have the same >> connecting problem as it was posted earlier in this mailing list: Win7 64Bit SP1 client (German) with Shrew VPN Client 2.1.7 (and 2.2.0 beta, separetly tested). Trying to connect brings me to the "negotiation timeout accoured" message. Checked the adapter settings (Filter) with all tried media (Mobile Phone, WiFi, Ethernet/cable) Using WinXP / SP3 (german) everything is working as exprected with every media (mobile, WiFi...) Using a LANCON 1722 VPN Gateway with the lates Firmware (LC.OS) Attached you'll find an IKE trace log. Any help would be highly appreciated! I would first check the VPN gateway logs to see if it even sees the Do you have any other VPN software installed on the Win7 mac >> >>> width:100%">part of an Act >> Domain? >> >>> >> >>> >> >>> > > Hi David, > > My understanding is that the Shrew Soft Virtual Adapter does not get > enabled until the negotiation has at least partially progressed with the > VPN gateway. Based on the trace log you sent and your comment about no > packets reaching the gateway, negotiation does not even start in your case. > > I have a few questions for you: > > 1. Is the Win7 machine a laptop? Does it have the Microsoft Virtual > WiFi Miniport adapter enabled? If so, uninstall Shrew, disable the > Virtual WiFi adapter, reboot, then install Shrew again. > > OK, i'll do. I only disabled the adapter but did'nt reinstall the shrew software > > 2. The Windows XP machine that works, is it on the same network as the > Windows 7 machine? Are they behind a NAT so that VPN gateway sees them > coming from the same IP address? If so, can you try disconnecting the > other Shrew clients, wait 15 minutes, then try the Win7 machine? > > I'VE ALLWAYS TESTED WITH MY MOBIL PHONE, SO THERE IS NO NAT IN THAT GAME > > 3. Do you know how to use Wireshark to do a packet capture? If so, can > you do a capture to see if there's packets coming from the Win7 machine > going to the gateway? > > Yes, i know and i'll try as soon as i can (at the end of the week may be). > > _______________________________________________ > vpn-help mailing list > [email protected] [2] > http://lists.shrew.net/mailman/listinfo/vpn-help [3] Links: ------ [1] mailto:[email protected] [2] mailto:[email protected] [3] http://lists.shrew.net/mailman/listinfo/vpn-help
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
