Hey John, thx for dealing with my problem. I don't enter the vpn data manually instead I'm using a pcf import to set up the tunnel. My credentials are correct. What do you mean by adding that device to the client? Thx Mirco Am 19.11.2012 14:52 schrieb "John Primeaux" <[email protected]>:
> Have you added that device to the client and made sure your credentials > matched? Also, are you using the profile that you created using your > device, or are you going in and manually entering the settings for your > VPN. I know sometimes one simple mismatch can stop you from completing a > connection. I know in the past when it showed connected, but didn’t allow > me to access my software on the secure side had to do with a weak > connection and not having a stable VPN. So these are all things to > consider.**** > > ** ** > > *John Primeaux* > > *Technical Services Manager** > *[image: Description: Description: gscsaintssig]**** > > > 10431 Siegen Lane**** > > Suite 102**** > > Baton Rouge, LA 70810**** > > Office: 225.292.3002**** > > Email: [email protected]**** > > Web: www.gulfstatespc.com**** > > * * > > *CONFIDENTIALITY NOTICE*: This communication may contain confidential > information intended for use only by the recipient(s) named above. Use of > this information by any party(ies) other than the intended recipient(s) is > strictly prohibited. If you have received this communication in error, > please notify the sender immediately.**** > > ** ** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Mirco Freiberg > *Sent:* Wednesday, November 14, 2012 2:01 PM > *To:* [email protected] > *Subject:* Re: [vpn-help] VPN connection established but wrong route**** > > ** ** > > Hi, I still have an issue in using my VPN connection. No matter what I > try, the tunnel is shown as connected but still I cannot use the vpn tunnel > but am connected to my local wlan net. What may go wrong here? What details > can I provide to clarify my problem?**** > > thank you for any hint,**** > > Mirco**** > > ** ** > > 2012/11/8 Mirco Freiberg <[email protected]>**** > > Hi,**** > > just set up a cisco VPN connection (via pcf import) with group PSK auth. > VPN connect shows "tunnel enabled" and I can see a new lan adapter being > set up having an ip address from my company net. Seems okay so far. **** > > When I try to call a service (http) which is available within my company > net only, it get a time out. When I call a web site which normally is being > filtered out by our company firewall I get a connection. Therefore I think, > the tunnel is not working properly and/or I have a routing issue.**** > > ** ** > > any advice on this problem?**** > > thx,**** > > Mirco **** > > ** ** >
<<image001.gif>>
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
