On 09/25/2012 03:42 PM, Mark Ruys wrote:
I try to get the VPN client to work, but it fails to configure the
adapter. This is the log I get:
config loaded for site 'PeerCode'
attached to key daemon ...
peer configured
iskamp proposal configured
esp proposal configured
client configured
local id configured
remote id configured
pre-shared key configured
bringing up tunnel ...
adapter configuration failed
tunnel disabled
detached from key daemon
I do see the "Shrew Soft Virtual Adapter" in my list of devices,
although it is disabled. Somewhere I read that's fine.
I tried both 2.2.0 beta 2, as 2.1.7. Windows 7 Professional 64 bit.
So how to get this working? Anyone experiences the same problem?
Hi Mark,
If you're still having the problem, can you generate a log report using
the Trace Utility? We can hopefully use that to help you.
Here's the instructions. Remember to increase the Log output level.
http://www.shrew.net/support/wiki/BugReportVpnWindows
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
