Hi, thank you for response. I've tried both - auto and unique, but without result. Tunnel is enabled but security associations are failed. UTM VPN log is as follows:[UTM50] Failed to get IPsec SA configuration for: *UTM Lans side network IP*/24<->remote computer local NAT IP/32 from remote.domain.com_[UTM50] Responding to new phase 2 negotiation: **WAN IP**[0]<=>*Remote computer network public IP*[0]_ For security reasons I've replaced real IP with *desription*.. Piotr --- On Mon, 12/3/12, Alexis La Goutte <[email protected]> wrote:
From: Alexis La Goutte <[email protected]> Subject: Re: [vpn-help] Netgear UTM50 connection problems To: "Piotr Pluciennik" <[email protected]> Cc: [email protected] Date: Monday, December 3, 2012, 6:43 PM Hi Piotr, How to is configured the Policy Generation Level ? (not be in auto mode but unique) Regards, On Mon, Dec 3, 2012 at 4:21 PM, Piotr Pluciennik <[email protected]> wrote: Hi all, I've got a problem connecting to Netgear UTM50 with Shrew Client. Tried to do it as described in the wiki, but without result. The only effect is that the tunnel is established and status is Connected, but Security Associations are failed. Tried different ways, but no effect... What is solution? Please help. Thanks in advance Piotr _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
