Hi Jochen, It is possible to attach your configuration ? How to your VPN Gateway is configured ? (it is possible to attach a ifinfo ?)
Regards, On Fri, Dec 28, 2012 at 8:12 AM, Finalbeta <[email protected]> wrote: > Hello list,**** > > ** ** > > I’m facing a problem with the VPN client (I think it is the client part) > when my client is inside the same network class. **** > > My tested clients are windows 7 or 8. > > My company subnet is 10.10.5.0/24 and 10.10.6.0/24**** > > My clients have no problem when they are inside a class B or C subnet. (So > clients connecting from 172.16.* or 192.168.* have no problem connecting)* > *** > > The same clients connecting from a local 10.10.*/24 can set up the ipsec > tunnel to the company, but it times out. I can get no traffic across it. > After several seconds the client gets disconnected. **** > > ** ** > > I’m using the netasq guide from the wiki. I’ve configured the remote > networks manually inside the configuration and I am using the local IP > address on the client. **** > > ** ** > > Thank you**** > > Jochen ([email protected])**** > > ** ** > > _______________________________________________ > vpn-help mailing list > [email protected] > http://lists.shrew.net/mailman/listinfo/vpn-help > >
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
