I downloaded the source from HEAD (Dec 16 2012) (since the stable
releases are over 2 years old) (http://www.shrew.net/download/ike)
I followed some instructions which I found here:
http://www.twobitcoder.com/?p=51#comment-267
Everything seems to have compiled and installed without any issues or
errors. I am running:
johnp@johndev:~$ uname -a
Linux johndev 3.0.0-25-generic #41-Ubuntu SMP Mon Aug 13 17:58:59 UTC
2012 x86_64 x86_64 x86_64 GNU/Linux
Where I run the demon I get the listed output:
|ii : created ike socket 0.0.0.0:500|
|ii : created natt socket 0.0.0.0:4500|
|## : IKE Daemon, ver 2.2.0|
|## : Copyright 2009 Shrew Soft Inc.|
|## : This product linked OpenSSL 1.0.0e 6 Sep 2011|
However, using nmap, I can see that both sockets are closed. So when I
run the client qikea and try to connect (after adding a configuration),
the UI times out. The output is:
config loaded for site 'Planitas-john'
attached to key daemon ...
peer configured
iskamp proposal configured
esp proposal configured
client configured
local id configured
remote id configured
pre-shared key configured
bringing up tunnel ...
negotiation timout occurred
tunnel disabled
detached from key daemon
The VPN config is a working one from another (windows) machine which has
been imported from a .vpn file.
I need some help fault finding here - any ideas?
_______________________________________________
vpn-help mailing list
[email protected]
https://lists.shrew.net/mailman/listinfo/vpn-help
