On 12/25/2012 01:56 AM, Emre Erenoglu wrote:
Hi,
I'm using self compiled Shrew 2.2.RC2 in Ubuntu 12.10.
The VPN connects fine, but no traffic passes through it and then the
"failed" count starts to increase.
rp_filter is set 0 for all interfaces.
I've analysed the problem and found that,
- once shrew connects, it sets up a default route through the VPN. This is
OK and needed.
- however, it does not set a specific route to the vpn host through the lan
gateway
- as a result, the vpn encapsulated packets don't know how to reach the vpn
host and all traffic gets blocked
I hope I could explain it. Once I set up a manual route to the vpn server
through my local router, it starts to work perfectly.
Is this a bug or do I miss something?
PS. This does not happen on Windows.
I wrote in your other thread that I thought there was already code to do
this in the 2.1.x code stream. I'm guessing this might be a regression bug.
_______________________________________________
vpn-help mailing list
[email protected]
https://lists.shrew.net/mailman/listinfo/vpn-help
