Dear Sir
Model Zyxel P661HNU-F1 Wireless VPN Router Shrew VPN Client Version 2.2.0 (Just Upgraded) I having major issue with this model of VPN Router. I have upgraded the Firmware to V3.10(TSX.11) the unit is in place and working both LAN / Wireless PC are attached and mobile phone which I can ping to without any issue. I NAT port forward setup for VNC which work and I have remote access to the router. Everything seem to working just the same as the older model P661HW-D1 / D2, until I come to the following:- (1) Shrew VPN Client Connection cannot connect as RoadWarrior or if I setup Net-to-Net but it work fine if I connect to the older model. I have followed all instruction on your router and on the client software, so could do with a little help on this one not just being told to get your own software, you router should work with any VPN client software. I can forward all the setting from both Router and client if that would help. Regards Nigel H Crosby Network Support Eng. Xircom System Limited The Dug Out 31 Tiverton Drive Harle Syke, Briercliffe Burnley, Lancashire BB10 2JT Tel: 01282 422741 Fax: 01282 422741 Mob: 07974 709833 UK Company Reg No. 4180936 UK VAT No. 703 4440 72 Email Disclaimer The information in this e-mail is confidential and may be legally privileged. If you are not the intended recipient, employee or agent responsible for delivering the message to the intended recipient, the reading, using, copying, distribution or dissemination of the information and/or the reliance on its contents is strictly prohibited. If you have received this e-mail and any attachments in error, please return the original message and attachments to us using the reply facility on e-mail. Having returned the e-mail, please delete it from your computer. Do You need to print this email? Be seen to be Green Don't Print it
<<image001.gif>>
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
