Hello! On a Windows Server 2008 R2 machine I have the Shrew VPN Client v2.2. I have two VPNs configured. The machine has 15 IP addresses. Both VPN are configured with Local Host mode='Use an existing adapter and current address'. When I establish a connection with the VPN 'A' the local address selected is the main IP of the Windows machine (1.1.1.1). However, ALL THE TIMES that I started the other VPN 'B' the local address selected is the second IP address of the Windows machine (2.2.2.2). I made several tests like:
1. Establish the VPN 'B' before the VPN 'A': Same result. The VPN 'B' is always using the 2nd local address and not the main local address 2. Check the logs: The log is always showing: 13/05/14 04:39:43 DB : peer added ( obj count = 1 ) 13/05/14 04:39:43 ii : local address 2.2.2.2 selected for peer 13/05/14 04:39:43 DB : peer ref increment ( ref count = 2, obj count = 1) 3. Add the secondary IP addresses to the Windows machine using with the 'skipsource' parameter: Done. However, the VPN client is always selecting the secondary IP address to establish that VPN. Then, I want to know why the Shrew VPN Client is always selecting the IP 1.1.1.1 as the local source for the VPN 'A' and the IP 2.2.2.2 as the local source for my VPN 'B'. This behavior was not on a previous machine Windows Server 2008 (Not R2) with the same number of IP addresses. On that machine, the VPN client ALWAYS selects the main IP address as the local source for any VPN. Thank you Juan _______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
