Hi List, Matthew, I (after a few hoops) installed shrew suite on a Debian Wheezy system, pretty much following the recipe to get to do the qikea gui.
(hoops included getting the -dev library packages installed of which there seems to be not enough information as to which ones are required... some issues were only solved when installed racoon from packages ) Now though, the iked is installed (it seems to shout the correct invitation) but it disappears almost imediately: lukasz@workhorse:~$ sudo /etc/init.d/iked start [sudo] password for lukasz: ******* lukasz@workhorse:~$ sudo ps aux |grep iked lukasz 18657 0.0 0.0 3548 808 pts/2 S+ 07:41 0:00 grep iked doing it by: lukasz@workhorse:~$ sudo iked ii : created ike socket 0.0.0.0:500 ii : created natt socket 0.0.0.0:4500 ## : IKE Daemon, ver 2.2.0 ## : Copyright 2013 Shrew Soft Inc. ## : This product linked OpenSSL 1.0.1e 11 Feb 2013 ii : opened '/var/log/iked.log' lukasz@workhorse:~$ less /var/log/iked.log lukasz@workhorse:~$ cat /var/log/iked.log 13/05/16 07:42:43 ## : IKE Daemon, ver 2.2.0 13/05/16 07:42:43 ## : Copyright 2013 Shrew Soft Inc. 13/05/16 07:42:43 ## : This product linked OpenSSL 1.0.1e 11 Feb 2013 13/05/16 07:42:43 ii : opened '/var/log/iked.log' still doesn't help (iked isn't running) (I copied example config and the init script from the extracted source) Anything else I can do to capture the cause of this ?
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
