On 05/17/2013 08:08 AM, Fabian Schroeter wrote:
Hi,
when trying to connect to my AVM Fritz!Box 7390 (firmware up-to-date) with
ShrewSoft VPN Client, I get the following message:
<snip>
So maybe anyone out there might help me or at least tell me at which point
the problem occurs as I am novice at VPN. For that I attached my debug
report as well as my system information.
<snip>
13/05/17 13:03:38 <A : client config message
13/05/17 13:03:38 <A : local id '[email protected]' message
13/05/17 13:03:38 <A : preshared key message
<snip>
13/05/17 13:03:38 -> : send IKE packet 192.168.0.23:500 -> XX.XXX.XX.XXX:500
( 562 bytes )
13/05/17 13:03:38 DB : phase1 resend event scheduled ( ref count = 2 )
13/05/17 13:03:43 -> : resend 1 phase1 packet(s) [0/2] 192.168.0.23:500 ->
XX.XXX.XX.XXX:500
13/05/17 13:03:48 -> : resend 1 phase1 packet(s) [1/2] 192.168.0.23:500 ->
XX.XXX.XX.XXX:500
13/05/17 13:03:53 -> : resend 1 phase1 packet(s) [2/2] 192.168.0.23:500 ->
XX.XXX.XX.XXX:500
13/05/17 13:03:58 ii : resend limit exceeded for phase1 exchange
Hi Fabian,
I know this message is a bit old, but in case you're still having the
problem...
The issue is that the gateway is not responding to Shrew's request to
connect. My guess is that you've got the settings wrong on the
Authentication/Local Identity tab in the Shrew config.
The gateway is seeing a request come in from an identity it does not
know and is dropping the request.
_______________________________________________
vpn-help mailing list
[email protected]
https://lists.shrew.net/mailman/listinfo/vpn-help
