Thanks for your time, Axel. Its odd: if I run the ikec as a command it works OK. If I run it from the batch, it doesnt. I have changed the path and write it with , but still having the same problem. Dont know what else I can do
Andres. From: Axel Eystein Jensen [mailto:[email protected]] On Behalf Of Axel E. Jensen Sent: Monday, 16 September, 2013 3:06 PM To: José Andrés Matamoros Guevara Cc: [email protected] Subject: Re: [vpn-help] Running ikec but can't make a batch Hi Andres I believe, that I unfortunately misinformed you. Sorry about that. Looking in 'ikec' man page, the '-r' option is given the name of the Site Configuration. I'm not sure, if this is the same as the filename? If I make a minimal bash script, it works ok : #!/bin/bash ikec -r "myvpnsite" -u UserName -p PassWord -a I hope it'll help you /Axel On 09/16/2013 07:38 PM, José Andrés Matamoros Guevara wrote: Sorry for the latency, I have been making many tries and have same result. Im pasting the last result with the full path. [root@Elastix3New ~]# service aicsrv start ikec is not working Malloc done! ii : ## : VPN Connect, ver 2.2.1 ## : Copyright 2013 Shrew Soft Inc. ## : press the <h> key for help !! : failed to load '/usr/bin/ike/source/ikec/VPNfile.vpn' I have called the batch aicsrv. If you have any other idea J Andres. From: [email protected] [mailto:[email protected]] On Behalf Of Axel E. Jensen Sent: Tuesday, 10 September, 2013 11:56 PM To: [email protected] Subject: Re: [vpn-help] Running ikec but can't make a batch Hi Andres Could it be, that you need to specify the full path of the 'VPNfile.vpn' in the bash script? /Axel On 09/10/2013 01:15 AM, José Andrés Matamoros Guevara wrote: Hi, guys! After a lot of reading and working, I have my vpn client running on a CentOS with no problems. Now, Im trying to make it automatic because tunnel is falling down anytime and the installation is remote. So, I have written a little batch: #!/bin/bash # # ikec # # Run as cron job to keep ikec VPN alive # if [ $(pgrep ikec) -gt 0 ] then echo "ikec is working" else echo "ikec is not working" export MALLOC_CHECK_=0 echo "Malloc done!" ./usr/bin/ike/source/ikec/ikec -r VPNfile.vpn -u RemoteUser -p UserCode -a fi exit If I run the command ./ikec r VPNfile.vpn u RemoteUser p UserCode a from the ikec directory, everything run OK. If I run this batch, the VPNfile.vpn is not found Any idea? Im newbie in the batch world, hope anyone can give me some advices. Glad to be here! Andres. _______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
