I have an issue with Shrewsoft that seems to have happened over night. Connecting to a Cisco ASA 5510. Was working yesterday and now today it connects, but after 33 seconds I get the message "session terminated by gateway"
I am running Windows 8.1, have a remote staff person that uses this all day long and it is doing the same for her. She has Windows 8. As a test I installed the client on a Windows 7 32bit install and I get the same behavior. From a different Windows 7 computer, with the Cisco client I can connect just fine. I checked Windows updates and nothing has been installed. Logged in to the ASA. Nothing has changed in months and the last time it was rebooted was almost 200 days ago. I rebooted it anyway to see if that would help, but it doesn't. I have another client with a Cisco ASA 5505 and I can still connect to their IPSec VPN. So it is something with this particular firewall and ShrewSoft combination. I created another VPN on this firewall and it is doing the same thing. Here is what shows in the ShrewSoft VPN Connect tab config loaded for site 'OSM' attached to key daemon ... peer configured iskamp proposal configured esp proposal configured client configured local id configured remote id configured pre-shared key configured bringing up tunnel ... network device configured tunnel enabled session terminated by gateway tunnel disabled detached from key daemon If I switch to the Network tab, under Security Associations it shows Failed - 2. I am at a loss, anyone have any ideas at all? Nathan _______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
