Hi Alexis, Thanks for your reply! As you suggested this was indeed a problem with transforms... I managed to solve my issue by setting the 'esp-3des' transform algorithm explicitly (instead of 'auto') in the Phase2 tab. I think that I still have some fragmentation problem, but at least this is a step forward ;-) Thanks again for your help.
Regards, Guido 2014-05-05 9:42 GMT+02:00 Alexis La Goutte <[email protected]>: > Hi Guido, > > Do you have try to remove some transform (in Phase 2) because there is > a lot of transform (> 40) and there is may be a problem of IP > fragmentation ! > > Regards, > > On Sun, May 4, 2014 at 5:13 AM, Guido 嵬 到 <[email protected]> wrote: >> Hi, >> >> I am experiencing problems connecting to my company VPN, using the >> 2.2.2 client on Windows 8.1 / 32bit (imported PCF configuration). >> The connection is established, but no traffic passes through, and I >> get disconnected by the server after a while. If I look at security >> associations in the VPN Trace utility, I can see 2 associations remain >> in LARVAL state, before forced disconnection, and no bytes are >> exchanged. Please see my logs attached for more info. >> >> The problem appears only when I am connected to the internet by a >> Pocket WiFi - LTE cellular access point that I rented in Japan, >> otherwise the client works fine. >> I thought to a NAT/firewall issue with the access point, but note that >> I manage to connect using the same Pocket WiFi access point, but using >> iOS Cisco VPN software embedded in my iPad. >> >> I would really appreciate any help from you all on this issue! >> >> Regards, >> Guido >> >> _______________________________________________ >> vpn-help mailing list >> [email protected] >> https://lists.shrew.net/mailman/listinfo/vpn-help >> _______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
