Problem:
VPN Client 2.2.2 installs successfully, but the Shrew Soft Virtual Adapter will not start. * Device Manager reports the following status: "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)" * No virtual adapter appears in the Network Connections * VPN connection fails as follows: config loaded for site 'Office' attached to key daemon ... peer configured iskamp proposal configured esp proposal configured client configured local id configured remote id configured pre-shared key configured bringing up tunnel ... adapter configuration failed tunnel disabled detached from key daemon Each connection attempt adds a new Shrew Soft Virtual Adapter to Device Manager. Environment: * VPN Client Version: 2.2.2 * OS: Windows 7 Home Premium 64-bit Resolution steps already attempted: * Uninstall (including manual removal of virtualnet.sys) and reinstall software. * Upgrade wireless adapter driver (Intel Centrino Advanced-N 6230). Any other suggestions would be very much appreciated. Please let me know if you need any further information. Regards Dan Lambert
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
