Hi, Just to let you know, I solved this issue by changing the "Connection Type" parameter in my mobile broadband connection software. The VPN did not work with the default "NDIS" connection type, I had to set it to "RAS(modem)".
Guido 2014-07-24 16:15 GMT+02:00 Guido 嵬 到 <[email protected]>: > Hi, > > I am experiencing problems connecting to my company VPN, using the > 2.2.2 client on Windows 8.1 / 32bit (imported PCF configuration), on a > mobile broadband internet connection: > > 14/07/24 15:19:46 -> : send IKE packet 172.20.xx.xx:500 -> > 91.xx.xx.xx:500 ( 1148 bytes ) > 14/07/24 15:19:46 DB : phase1 resend event scheduled ( ref count = 2 ) > 14/07/24 15:19:51 -> : resend 1 phase1 packet(s) [0/2] > 172.20.xx.xx:500 -> 91.xx.xx.xx:500 > 14/07/24 15:19:56 -> : resend 1 phase1 packet(s) [1/2] > 172.20.xx.xx:500 -> 91.xx.xx.xx:500 > 14/07/24 15:20:01 -> : resend 1 phase1 packet(s) [2/2] > 172.20.xx.xx:500 -> 91.xx.xx.xx:500 > 14/07/24 15:20:06 ii : resend limit exceeded for phase1 exchange > > It looks like the client doesn't get any packet back on UDP port 500 > (I also used wireshark to make sure). > > The problem appears only when I am connected to the internet by this > mobile broadband connection, otherwise the VPN connection is fine. I > thought that the internet provider was filtering VPN traffic, but > using iOS Cisco VPN software embedded in my iPad I manage to connect > using the same broadband connection. > I also tried the different NAT trasversal options in the client, but > without success. > > Could you please help me with this issue? > Thank you! > > Regards, > Guido _______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
